Mytek Ptools-HD DIO Card – User Manual Mytek Ptools HD DIO CardUser Manual ver. 1.0 / Jan 2007© Mytek 2006User Manual ver. 1.0 / jan 2007
Mytek Ptools-HD DIO Card – User Manual 7. Attach card ribbon cable to DIOCARD1 connector on the mainboard.8. Gently push the card ins
Mytek Ptools-HD DIO Card – User Manual 9. Screw in converter top cover.10. Connect power and signal lines.11. Turn the converter on.
Mytek Ptools-HD DIO Card – User Manual Connecting Clock Signal LineSingle converterIf a single converter is used in the system, choos
Mytek Ptools-HD DIO Card – User Manual Multiple convertersProtools HD system can accept up to two converters connected to each card.
Mytek Ptools-HD DIO Card – User Manual Input ConnectionPtools DIO-HD card features two connectors: Primary Port and Expansion Port. F
Mytek Ptools-HD DIO Card – User Manual Signal RoutingWhile Protools software allows for up to 16 channels of input or output, only 8
Mytek Ptools-HD DIO Card – User Manual OutputTo playback signal from Protools to converter analog outputs SOURCE TO ANALOG OUT should
Mytek Ptools-HD DIO Card – User Manual Launch and ConfigurationAfter the cardinstallation in the converter, and after each hardware c
Mytek Ptools-HD DIO Card – User Manual 6. Select each converter and press Set to Default to set the application in the normal work mo
Mytek Ptools-HD DIO Card – User Manual Typical ConfigurationsSingle 8x192 ADDA converter1. Connect the 8×192 ADDA (through Primary P
Mytek Ptools-HD DIO Card – User Manual This manual may be updatedDownload the newest version at:http://www.mytekdigital.com/documents lib
Mytek Ptools-HD DIO Card – User Manual 6. If hardware configuration was changed, open Setup > Hardware Setup and press Set To Defa
Mytek Ptools-HD DIO Card – User Manual 11. In the editing panel assign input and output channels, according to the I/O Setup configur
Mytek Ptools-HD DIO Card – User Manual Two 8x192 ADDA converters, first on internal clock (clock master), second as slave1. Connect
Mytek Ptools-HD DIO Card – User Manual 8. Open Setup > Hardware Setup and check: ✔ Are 8×192 ADDA Mytek Digital converters properl
Mytek Ptools-HD DIO Card – User Manual 12. Use SOURCE TO DIGITAL OUT and SOURCE TO ANALOG OUT buttons to set desired signal flow in
Mytek Ptools-HD DIO Card – User Manual 14. In the editing panel assign input and output channels, according to the I/O Setup configur
Mytek Ptools-HD DIO Card – User Manual Software updateWARNING!Remember to follow basic safety rules about handling of electronic devi
Mytek Ptools-HD DIO Card – User Manual 3. Locate the memory socket on the converter main board.4. Gently remove old memory chip.To av
Mytek Ptools-HD DIO Card – User Manual 5. Carefully insert new memory chip in the socket. The chip slot (pin1) should be matching the
Mytek Ptools-HD DIO Card – User Manual 7. Attach power cord and other cabling.8. Turn on the converter.For about 2 seconds no LED sho
Mytek Ptools-HD DIO Card – User Manual ContentContent...
Mytek Ptools-HD DIO Card – User Manual IntroductionMytek Ptools-HD DIO Card is a physical card that plugs into the back of the Mytek
Mytek Ptools-HD DIO Card – User Manual Quick Start1. DIO-HD card installationRemove top cover from the converter, unscrew DIOCARD1 sl
Mytek Ptools-HD DIO Card – User Manual 5. Routing configuration within converters In The Mytek 8X192 ADDA SOURCE TO DIGITAL OUT defin
Mytek Ptools-HD DIO Card – User Manual Card InstallationOnly single Ptools-HD DIO Card can be installed in one converter. A different
Mytek Ptools-HD DIO Card – User Manual 3. Remove top cover.4. Locate the DIOCARD1 expansion slot on the mainboard.User Manual ver. 1
Mytek Ptools-HD DIO Card – User Manual 5. Unscrew cover plate of DIOCARD1 slot from the rear panel.6. Partially insert the card from
Kommentare zu diesen Handbüchern